Starlink Enterprise Ethernet Adapter – SPX Plug to RJ45 Waterproof Cable Extension
About this item;
**Secure Connection & IP67 Waterproof Rating**- This Starlink adapter features a robust, waterproof design with a clear IP67 rating, as shown by the “IP67 Waterproof” text. The red waterproof plugs effectively protect the cable and connections from water, dust, and other environmental elements, ensuring reliable performance in various conditions, as depicted in the clear sky, sand, rain, and snow icons.
**High-Quality Signal Transmission**- This adapter ensures stable and reliable signal transmission through its high-quality construction. The adapter uses 22AWG shielded wires with an anti-aging rubber jacket, as shown in the internal cable diagram, ensuring superior data transmission performance, low impedance and great weather resistance.
**Wide Compatibility with Starlink Enterprise**- This Ethernet adapter is specifically designed to replace the original Starlink Enterprise cable. It enables a direct connection between the Starlink dish and a power supply using a standard Ethernet cable. This eliminates the need for the original proprietary cable, as visually noted in the diagram that shows a power supply connected through the adapter.
**Convenient End Caps for Connection Protection**- The adapter includes removable end caps on the RJ45 and SPX plugs, as seen in the product detail images. These end caps protect the connector contacts from dust, dirt, and damage when not in use, ensuring a clean and tidy connection for improved durability and reliable performance.
**Simplified Installation Process**- This adapter is designed for a straightforward and easy installation process as shown in one of the images. The adapter makes connecting the Starlink dish directly to a power supply simple by using a standard Ethernet cable that is up to 175ft.
Spec
Part No Enterprise-RJ45
Color Black
Wire Size 22AWG Each Cord
Compatible Starlink Enterprise
Connection Type SPX Plug to RJ45
Related products
-
Read moreNote: To ensure proper charging functionality, especially with the USB-C port, please connect the DC cable to a power source before connecting any devices. Hot-plugging (connecting or disconnecting while power is on) may result in the device failing to charge.
About this item;
【Portable Power for Starlink Mini】- This USB-C to DC cable empowers you to use a power bank as a reliable power source for your Starlink Mini dish antenna. The cable’s 5.9FT/1.8M length provides flexibility in setup, while its portability makes it perfect for on-the-go connectivity.
【Optimized Power Requirements】- For optimal performance and long-term reliability, a power bank with an output power of 100 watts or more is recommended. The cable requires a USB PD source that supports at least 65W (20V/3.25A output) to ensure a stable 20V output to the Starlink Mini.
【High-Capacity Power Transmission】- This cable utilizes high-grade 18AWG wires and supports a maximum power output of 140W (20V/7A), ensuring efficient and reliable power delivery to your Starlink Mini. This robust capacity safeguards your dish antenna from potential damage or performance issues caused by insufficient power.
【Effortless Plug-and-Play Setup】- The Starlink Mini USB-C to DC cord eliminates the need for additional power adapters and complex setup procedures. Simply connect the cable to a compatible USB-C PD power source and your Starlink Mini dish for instant power and connectivity.
【Convenient and User-Friendly】- This USB-C to DC cable is designed for ease of use and simplifies the process of connecting power to the Starlink Mini, making it ideal for users of all skill levels. Its plug-and-play functionality allows for quick and straightforward setup, ensuring a seamless experience.
Part No USBC-DC2.1-A-1.8M
Input Voltage 5V-20V DC
Min. Output Power 65W (20V/3.25A)
Max. Output Power 140W (20V/7A)
Wire Size 18AWG Each Cord
Wire Length 5.9FT/1.8M
Connector A USB-C
Connector B Barrel Jack Male with SL Proprietary Waterproof Gasket
Barrel Jack Dimensions 5.5mm Outer Diameter x 2.1mm Inner Diameter
Compatible Equipment Starlink Mini
Operating Temperature -20℃ to 60℃
Storage Temperature -40℃ to 85℃
Humidity 5% to 95% RH, non-condensing -
Read moreAbout this item;
**Easy and Secure Installation**- This Starlink pipe adapter is designed for hassle-free installation, fitting poles with diameters between 1.37″ and 1.53″. It securely attaches to your Starlink Gen 3 dish and the mounting pole, ensuring a stable and reliable connection for your Starlink internet setup.
**Durable and Weatherproof Construction**- This Gen3 pipe adapter is made of high-quality ABS material that can withstand the elements. Its rugged construction ensures long-lasting performance even in harsh outdoor conditions, providing a stable foundation for your Starlink system.
**Optimal Signal Reception**- This pole mount adapter maintains a secure and stable connection between your Starlink dish and the mounting pole. This ensures proper alignment and optimal signal reception for uninterrupted internet connectivity.
**Robust and Reliable Performance**- This Starlink pole mount is built for strength and reliability, even in challenging weather conditions. The shell clamp can hold over 200 pounds, ensuring your Starlink dish remains secure, even in strong winds. The shell cord is routed through the bottom of the clamp for added safety and stability.
**Wide Compatibility and Adaptability**- The adapter is compatible with a wide range of mounting poles within the specified diameter range, providing flexibility for a variety of mounting options. This versatility allows you to place the antenna in the optimal position for optimal starlink performance.
Spec
Part No Gen3-DM2
Material ABS
Size 7.4″5.5″3.93″ / 188mm140mm100mm
Load capacity up to 550 pounds
Pipe Diameter 1.37″ – 1.53″ / 35mm – 39mm
Compatible Starlink Gen 3 -
Read morePackage Includes
1Starlink Mini Tripod
1Starlink Mini Tripod Adapter
3Tent pegs
About this item;
**Stable and Portable Design**- This Starlink Mini tripod provides a stable and portable mounting solution for your Starlink Mini dish. The tripod’s lightweight and compact design makes it easy to carry and set up, whether you are camping, RVing, or simply need a convenient way to position your dish for optimal signal.
**Height-Adjustable for Optimal Signal**- The tripod features five-stage tiny telescopic legs that extend up to 7.1 inches (18 cm), with a minimum contracted height of 2.4 inches (6 cm). This allows you to adjust the height of your Starlink Mini dish and achieve the best possible signal reception, even in areas with obstructions.
**Enhanced Stability Features**- This Starlink Mini tripod is designed for enhanced stability in various environments. The tripod feet have anti-slip rubber pads for secure placement on smooth surfaces. Reserved holes near the feet accommodate tent pegs (included) for added stability on soft ground or grass.
**Compatibility with Starlink Mini**- The tripod includes a custom-designed aluminum block adapter tailored specifically for the Starlink Mini’s pipe adapter. This adapter screws securely onto the pipe mount, providing a stable and reliable connection. The adapter then attaches to the tripod head via a screw thread.
**Versatile Use Cases**- This portable and adjustable tripod expands the placement options for your Starlink Mini. It’s ideal for camping, backyard use, RVing, or any situation where a temporary and stable mount is needed. This tripod provides a compact and reliable way to ensure a strong Starlink connection wherever you go.
Spec
Part No MINI-BR13
Tripod Height
18 to 24 cm (4.7 to 7.1 inches)
Tripod Material Plastic
Tripod Adapter Material Aluminum Alloy
Color Black and Red
Compatible Starlink MINI -
Read moreAbout this item;
**Secure Magnetic Attachment**- This Starlink Mini roof mount utilizes a powerful magnetic base, providing a secure and reliable attachment to metal surfaces. The magnetic base has a pulling force of up to 66 pounds (approx. 30 kg) and ensures a firm hold, making it suitable for car roofs, RV roofs, iron roofs, and other metal structures.
**360-Degree Rotation for Optimized Signal**- This mount features a 360-degree adjustable ball head, enabling you to easily rotate and position your Starlink Mini dish for optimal signal reception. This flexibility allows you to fine-tune the antenna’s direction regardless of the mounting surface’s orientation.
**Durable and Protective Design**- This magnetic mount is crafted from high-quality aluminum and features a robust construction built for durability and long-lasting performance. The rubber-wrapped magnets provide added protection for your vehicle’s paint, preventing scratches and marring.
**Easy Installation and Setup**- The mount is designed for straightforward, tool-free installation. The magnetic base attaches securely to any metallic surface, eliminating the need for drilling or additional hardware. The design allows for quick removal and repositioning when needed.
**Designed for Starlink Mini’s Original Pipe Adapter**- The mount is designed for seamless compatibility with the original Starlink Mini pipe adapter, providing a secure and stable connection. The adapter is easily connected and locked in place.
**Versatile Mounting Solutiony**- This mount offers a versatile solution for various mounting scenarios. Its magnetic base makes it ideal for car roofs, RV roofs, iron roofs, and even other metal surfaces. The ease of installation and adjustment makes it suitable for both temporary and semi-permanent mounting situations.
Spec
Part No MINI-BR12
Mount Material Steel
Mount Type Magnetic
Color Black
Compatible Starlink Mini -
Read moreNote: The included tripod adapter is specially designed for this kickstand and has a smaller diameter than the official Starlink pipe adapter.
Package Includes
1Starlink Mini One-Piece Kickstand and Pipe Adapter
1Starlink Mini Special Tripod Adapter
About this item;
**Versatile Integrated Design**- This Starlink Mini accessory combines a stable stand, a pipe adapter, and a tripod mount into a single, streamlined unit. The design simplifies your setup, eliminates the need for separate components, and enhances the portability of your Starlink Mini.
**Stable and Durable Stand**- The integrated stand is crafted from durable, high-quality materials to provide a reliable and stable base for your Starlink Mini. Its one-piece design minimizes wobble and ensures consistent performance, whether on a table or the ground.
**Secure and Tool-Free Installation**- This Starlink Mini kickstand and pipe adapter is designed for effortless, tool-free installation. It securely attaches to your Starlink Mini dish with a simple snap-in mechanism, requiring no additional tools or hardware.
**Enhanced Mounting Options**- A built-in 1/4″ threaded mount allows seamless attachment to compatible tripods. This greatly expands mounting flexibility, enabling you to achieve precise positioning. The integrated pipe adapter is designed to fit poles with a maximum diameter of 37mm (1.45 inches). This provides a stable and robust mounting option.
**Improved Portability**-The integrated design and lightweight construction of this accessory enhances portability, making it easier to transport and set up your Starlink Mini in various locations.
Spec
Part No MINI-DM3-BA
Color White and Silver
Tripod Adapter Material Anodized Aluminum Alloy
Tripod Adapter Threaded 1/4″
Fit Pole Size Max. 37mm/1.45″
Compatible Starlink Mini